OPPO R11 is an OPPO that is a smartphone released on June 10 this year. It is possible to continue my words, bring OPPO to a new height. According to the official announcement, the R11 line is sold over 40 minutes of sales of R9S all day sales data, which is worthy of the title of popularity.
In terms of configuration, the OPPO R11 uses a 5.5-inch AMOLED 1080p display, which is equipged 660 processor, built-in 4GB RAM + 64GB ROM, front 20 million pixel camera, rear 16 million + 200 million pixel dual camera, battery capacity is 3000mAh .
Compared to R9S, OPPO R11 except for the upgrade of the configuration, it is also the first OPPO phone with a dual camera. It is also the first mobile phone equipped with the Snapdragon 660.
What is the interior of this mobile phone that is popular with a mobile phone?
Before you remove the machine, we must first remove the two small screws at the bottom of the phone, but also take off the SIM card slot.
Like most mobile phones that use metal fuselage, OPPO R11 also needs to open the front panel to see internal space.
The binding of the front panel and metal is relatively close, requiring the shrapnel to reach the interior space while sucking the screen with a suction cup, and the two pulls one can decompose.
You can see the rear shell is integrated, and the inner edge of the middle frame has a layer of rubber, in addition to the visiting the screen to resist the liquid, effectively protect the internal components from corrosion.
The buckle of the OPPO R11 is extended in the metal frame, and the hardness is more closely integrated. Although the official does not propagate the waterproofing, R11 should have no problem with life splash.
The interior of OPPO R11 is also three-stage design. The motherboard is on, the secondary board is under, the battery occupies most space, and the three are very compact.
The cable is under the motherboard, and it is also specially equipped with a metal and solid strip, and the screw is pressed against a loose appearance. This design is not only reliable, but also reduces the difficulty of maintenance.
Before the demolition, you must first remove its dual camera module. Although two cameras can work alone, one of them is broken, then they have to replace it.
The metal shield of the motherboard is accompanied by a graphite heat
All components cover the metal shield, the shield is a snap design, which can be disassembled separately.
The main board layout of OPPO R11 is indeed sophisticated, and the back is mainly the core components, the Snapdragon 660 processor, Samsung's memory, flash memory, etc., where memory and flash are encapsulated with EMCP, which can reduce the thickness of the body.
The front of the motherboard is RF power amplifier, and the careful small partners may notice that there is a silica film on the demolished metal shield, allowing heat to pass through the metal shield faster.
The OPPO R11 is not seen in front of the light sensor, because it uses a hidden design.
It can be seen from the inside that the camera opening is transparent, but the other holes use special coating treatment so that it is not obvious from the outside, which is also the cleverness of the machine.
There are vibrators, VOOC flashing interfaces and one sound cavity.
Summarize
OPPO's workmanship is still an excellent, and it reflects the style of the big factory in workmanship and materials. Its internal structure is compact, and it is also depressed in such a thin body, a battery of 3000 mAh is also added. Moreover, OPPO also made waterproof design on the body, with this function, even if it is not careful in daily use, it is not worried that it will be damaged, and these are the powerful proof of OPPO industrial design.
Our other product:
